# ip firewall

## Syntax

```
[no] ip firewall off|on
```

## Syntax Description

<table><thead><tr><th width="203">Keyword</th><th>Description</th></tr></thead><tbody><tr><td>no</td><td>(Optional) Returns the Internet firewall to its default state.</td></tr><tr><td>off</td><td>Disables the Internet firewall</td></tr><tr><td>on</td><td>Enables the Internet firewall</td></tr></tbody></table>

## Defaults

The inbound Internet firewall is on by default.

## Usage Guidelines

This command disables the firewall function that blocks incoming traffic on a WAN interface. It takes effect only when there is a single physical port active on the Island.

This command should be used with extreme care and is intended only for very specific use cases such as using Island as a dedicated VPN concentrator, where firewall functionality is undesirable or handled by an external firewall. Note that all other Island functionality, including content filtering, is still active even when the firewall is disabled.

## Examples

```
ip firewall off
```

## Related Commands


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.islandrouter.com/island-router-cli-2.3.2/commands/ip-global-context/ip-firewall.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.